none

Breathe easy with JetVent Air Mover

26-10-2010
by 
in 

Say goodbye to hot, stagnant air in the workplace with Fantech’s latest development in ventilation solutions.

The JetVent Air Mover is ideal in large enclosed areas providing a revitalising cross-flow of air.

Fantech Engineering Manager Kerry Dumicich says the low profile and high mounting position of the air mover means it will not interfere with floor activities in warehouses, work areas and public recreation facilities.

“From a safety point of view the JetVent Air Mover is better than most alternatives because you don’t need to be concerned about electrical leads on the floor and becoming tangled in them and tripping over,” says Mr Dumicich.

“There is also minimal interference with vertical space under the unit. Pallets can be safely stacked under the unit as the fan is enclosed in a sturdy galvanised housing.

“Further, it’s a high performance economical ventilation solution for these large enclosed spaces, see the difference it can make to the productivity and concentration from warehouse and production staff.”

The efficiency of the Air mover is in part due to the aerodynamic design of the interior fan housing which maximises air velocity and hence the distance the air travels, as a result fresh air can be felt up to 20m from the unit.

Mr Dumicich says air movement is important as it enabled heat transfer.

“As the air passes by, a small amount of body heat is transferred to the moving air, creating a feeling of freshness because the air is continually moving you don’t get a build up of hot, stagnant air. This in turn results in a more comfortable and enjoyable environment,” he says.

The Air Mover has adjustable outlet nozzle vanes that allow airflow to be redirected to optimise air movement in a particular area.

Operating at a maximum of 54 decibels (A) at 3m, the unit is relatively quiet so has little impact on the day-to-day activities within the building.

Two models are available, a single high-speed unit for 240V single phase electrical outputs, and a two speed unit for 415V three-phase electrical outputs.

Weighing only 85kg, the JetVent air mover comes with easy to read instructions for mounting and operation and a 12-month warranty.

Fantech
Ph: 1800 133 379
www.fantech.com.au

Related news & editorials

  1. 16.03.2018
    16.03.2018
    by      In
    In the 1960s, as much as a quarter of Australia’s workforce was employed in the manufacturing sector, and the industry fuelled 25% of the nation’s economy, according to the Productivity Commission. Half a century on, the closure of Toyota, Ford and then General Motors in October 2017 seemed to... Read More
  2. 24.01.2018
    24.01.2018
    by      In
    According to Southern Cross CEO, Mark Ferguson, if Australian industry really wants to get serious about saving energy then it needs to take a close look at ‘two-stage’, air compressor technology. As energy costs continue to outstrip other business input expenses it is critical, more than ever... Read More
  3. Martin Chappell
    03.11.2017
    03.11.2017
    by      In
    With Australia’s manufacturing industry strengthening, leaders and heads of IT are weighing up which new technologies they should implement to gain a competitive edge. Martin Chappell from Motorola Solutions explains how a simpler and more focused use of data can be the best approach.
    Australia’s... Read More
  4. Sahara Force India F1
    29.08.2017
    29.08.2017
    by      In
    The pace of Formula One (F1) development is rivalled only by the speeds achieved on the racetrack. Each time the Sahara Force India F1 Team brings its car to a circuit, it represents the team’s top engineering; every time the team leaves, the car is just a baseline. Between races it must be... Read More