none

BEACONS BOAST MULTIPLE APPROVALS

10-05-2019
by 
in 

The latest additions to the E2S Warning Signals D1x family from Mechtric are the D1xB2 beacons, which are SIL1 and SIL 2 compliant units with a choice of xenon or LED light sources.

Strobes are offered in 5, 10, 15 or 21J xenon variants with four flash rate options, and are approved for private mode fire alarm use to UL1638. The high-power LED array features a steady mode for status applications, five flash patterns and three remotely selectable alarm stages/channels.

The beacons are UL/cUL and ULC approved for use in Class I/II Division 1, Zone 1 and Zone 21 explosion proof environments and IECEx and ATEX certified for Zone 1 and 21 applications, making them a truly global solution.

The UV stable polycarbonate lens filters, protected by a stainless-steel guard, are available in amber, blue, clear, green, magenta, red and yellow. The lens design enhances the light output and is field replaceable, enabling beacons to be repurposed on site.

The lightweight marine-grade aluminium corrosion-resistant enclosure can be either conduit or surface mounted, using the built-in mounting lugs. An optional stainless-steel mounting bracket is available providing fully adjustable positioning in any direction.

Mechtric
1800 252 995
www.mechtric.com.au

Related news & editorials

  1. 22.09.2021
    22.09.2021
    by      In
    Leussink, the exclusive Australian distributor of Demmeler 3D Welding table solutions, has expanded its range with the new Demmeler WeldSpace system, a fully equipped welding cell with a built-in welding cobot.
    Leussink’s Managing Director Jason Leussink says the new Demmeler WeldSpace system is... Read More
  2. 22.09.2021
    22.09.2021
    by      In
    In a $600,000 research partnership between AML3D Limited and Deakin University, supported through the Innovative Manufacturing Cooperative Research Centre (IMCRC), experts are developing high strength aluminium – scandium welding wire for Wire Additive Manufacturing (WAM®) applications.
    AML3D, a... Read More
  3. 22.09.2021
    22.09.2021
    by      In
    New Elesa stainless steel hinges in AISI 304 grade join the company’s existing ranges in both 304 and 316 grades, offering high strength for heavy doors as well as excellent corrosion resistance.
    These are especially suited to enclosure installations in arduous environments, such as pharmaceutical... Read More
  4. 20.09.2021
    20.09.2021
    by      In
    Lateral restraint blocks made of an engineering plastic that typically retains most of its strength over 100 years are being produced by Hercules Engineering to safeguard suburban and highway concrete bridges against earthquakes and radical structural movement.
    The custom-fabricated high density... Read More
Products
Suppliers