none

ATOMISING SPRAY NOZZLES STOP WITHOUT DRIPS

15-10-2019
by 
in 

When spraying any type of liquid, post-spray liquid flow can cause big problems. Unwanted drips can ruin product function on sealing or mating surfaces and ruin the appearance of painted or coated finishes. In addition, excess liquid flow wastes precious resources such as expensive coatings, chemicals or water.

Now Exair has developed a novel half-inch no-drip internal-mix atomising spray nozzle that works in the same way as its standard atomising nozzles, but with the added benefit of positively stopping liquid flow when compressed air is shut off.

Internal-mix atomising spray nozzles mix liquid and air inside the nozzle and produce the finest atomisation of liquids up to 300cP. The patented no-drip design needs no additional airline.

Exair half-inch no-drip internal mix atomising nozzles are available in four patterns: narrow angle round, wide angle round, flat fan and 360° hollow circular pattern. They are for pressure-fed applications that don't require independent air and liquid control.

Available from Compressed Air Australia, the no-drip atomising nozzles are fully adjustable to minimise air and liquid consumption and have interchangeable liquid and air caps. Flow ranges from 0.5 to 1147L/h. They are also available in quarter- and eighth-inch sizes, and are CE compliant and conflict mineral free.

Compressed Air Australia
1300 787 688
www.caasafety.com.au

 

Related news & editorials

  1. 22.09.2021
    22.09.2021
    by      In
    Leussink, the exclusive Australian distributor of Demmeler 3D Welding table solutions, has expanded its range with the new Demmeler WeldSpace system, a fully equipped welding cell with a built-in welding cobot.
    Leussink’s Managing Director Jason Leussink says the new Demmeler WeldSpace system is... Read More
  2. 22.09.2021
    22.09.2021
    by      In
    In a $600,000 research partnership between AML3D Limited and Deakin University, supported through the Innovative Manufacturing Cooperative Research Centre (IMCRC), experts are developing high strength aluminium – scandium welding wire for Wire Additive Manufacturing (WAM®) applications.
    AML3D, a... Read More
  3. 22.09.2021
    22.09.2021
    by      In
    New Elesa stainless steel hinges in AISI 304 grade join the company’s existing ranges in both 304 and 316 grades, offering high strength for heavy doors as well as excellent corrosion resistance.
    These are especially suited to enclosure installations in arduous environments, such as pharmaceutical... Read More
  4. 20.09.2021
    20.09.2021
    by      In
    Lateral restraint blocks made of an engineering plastic that typically retains most of its strength over 100 years are being produced by Hercules Engineering to safeguard suburban and highway concrete bridges against earthquakes and radical structural movement.
    The custom-fabricated high density... Read More
Products
Suppliers