video-banner
none

AIR WIPES DRY, CLEAN AND COOL SMALL DIAMETERS

09-08-2019
by 
in 

Exair’s new Standard Air Wipe produces a 360° airstream that can blow off, dry, clean or cool the material passing through it. The split design can be clamped around continuously moving material such as wires, cables, hoses, pipes and extruded shapes. They are CE compliant and available from stock in aluminium in diameters from 3/8in (13mm) to 11in (279mm). Applications include wiping wire, drying inks, cooling hot extruded shapes and blowing off water, plating, coatings and dust.

The wipe ejects a small amount of compressed air through a thin slotted nozzle that pulls in high volumes of surrounding room air. The airflow uniformly ejects from the 360° of its inner diameter. Coupling brackets holding each half of the wipe together can be quickly latched together or released. Additional shims can be installed if more blowoff force is required. Air velocity can be varied with a pressure regulator and instant on/off control provides precision blowoff. Air consumption is 314L/min at 5.5bar and the sound level is low at only 82dBA.

Compressed Air Australia
1300 787 688
www.caasafety.com.au

Related news & editorials

  1. 21.10.2019
    21.10.2019
    by      In
    The measurement of fluid pressure in industrial applications is a key reliability factor from hydraulic systems to cooling systems and lubrication of machinery.
    Now Turck has developed an all-new series of pressure sensors that are uniquely designed for the requirements of industry in the 21st... Read More
  2. 16.10.2019
    16.10.2019
    by      In
    Control Logic has a new range of slimline signal conditioners from Red Lion specially designed for process signal amplification, isolation and conversion in industrial environments.
    In addition to a large array of input types, the range ensures high fidelity measurement of any temperature, analogue... Read More
  3. 15.10.2019
    15.10.2019
    by      In
    Omron reckons it is taking product inspection to another level with the release of its new FHV7 smart camera for advanced visual inspections on high-mix production lines.
    The FHV7 features the world’s first multi-colour light and high-resolution image sensor – billed as the best in class. This... Read More
  4. 15.10.2019
    15.10.2019
    by      In
    When spraying any type of liquid, post-spray liquid flow can cause big problems. Unwanted drips can ruin product function on sealing or mating surfaces and ruin the appearance of painted or coated finishes. In addition, excess liquid flow wastes precious resources such as expensive coatings,... Read More