none
none

HM-53GV Turret Milling Machine Inverter Variable Speed & Geared Head - Horizontal & Vertical (M162D)

By Hare & Forbes Machineryhouse

HM-53GV
Turret Milling Machine
Inverter Variable Speed & Geared Head
Horizontal & Vertical  (X) 600mm (Y) 200mm (Z) 340mm
Includes Digital Readout, Vice & Collet Chuck System

"This HM-53GV geared head vertical and horizontal turret milling machine now includes a inverter variable speed drive on the vertical spindle, with a powerful continuous-load 1.5kW / 2hp motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. Two levers mounted on right side of milling head enables quick change off the geared spindle speeds.

Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage work light, 150mm machine vice, 8 piece metric collet chuck set, coolant system, X axis power feed unit, drill chuck, 1' & 1-1/4' horizontal arbors, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.

Extra Features:
Swivel table
1' & 1-1/4' horizontal arbors

Features:
- Electronic inverter variable spindle speeds
- 3 Axis digital readout system
- Swivel table left & right with graduated scale
- Mill head tilts to ±90º left to right
- 500mm horizontally sliding and rotating ram
- NT30 Horizontal and vertical spindles that are hardened and ground
- Precision-ground dovetail slide-ways and table
- Precision milling table incorporating machined T slots
- Rear concertina slide-way cover
- Forward and reverse button switch
- Fine hand wheel operated quill feed
- Swarf & splash tray
- Spindle lock for quill
- Metric dial graduations @ 0.02mm for X , Y & Z-Axis
- Vertical dial graduations on hand wheel @ 0.05mm
- All slides utilise dovetail construction for maximum rigidity
- Includes 1' & 1-1/4' arbors for the horizontal spindle
-
- * Note: X & Y travels maybe reduced due to digital readout scales and safety stops
- * Note: Optional Y & Z power feeds require additional parts & fitting (not included)
 

Includes:
- Electronic inverter variable spindle speeds
- 3 Axis digital readout system
- X-Axis power-feed
- Safety cutter guard
- Swarf tray
- Coolant system
- Halogen lamp
- 150mm machine vice
- Drill chuck & arbor
- 2 & 3MT adaptors
- 8-piece metric collet chuck set (4-16mm)

Specifications:
ORDER CODE: M162D

Model: HM-53GV
Digital Readout: 3-Axis Digital Readout
Type: Vertical & Horizontal
Table Size: 1000 x 240mm
Spindle Taper - Vertical: NT30
Spindle Taper - Horizontal: NT30
Longitudinal Travel (X-Axis): 600mm *
Cross Travel (Y-Axis): 200mm *
Vertical Travel (Z-Axis): 340mm
Type of Slides: Dovetail
Ram Travel: 500mm
Spindle to Table: 375mm
Quill Travel / Diameter: 125mm / 90mm
Throat Depth (max.): 640mm
Tilting Head (Left ~ Right): ±90º
Tilting Head (Forward ~ Back): Fixed
Drilling Capacity: 30mm
End Milling Capacity: 25mm
Face Milling Capacity: 80mm
Power Feed - Quill: Manual
Power Feed - Longitudinal (X-Axis): 20 - 2000 mm/min
Power Feed - Cross (Y-Axis): Optional *
Power Feed - Vertical (Z-Axis): Optional *
Table T-Slot Size: 14mm
Work Table Load Capacity: 175kg
Spindle Speeds Vertical (steps/rpm): Variable (90-2000rpm)
Spindle Speeds Horizontal (steps/rpm): 9 (60-1350rpm)
Motor Power - Vertical: 1.5kW / 2hp
Motor Power - Horizontal: 1.5kW / 2hp
Motor Voltage: 240V
Overall Height: 2060mm
Weight (nett): 1050kg"