Ceramic Oxide Fabricators Australia
[ Products and services ] [ Latest News ] [ Images ] [ Videos ]
Phone
03 5446 3489
Address
83 Wood St
Eaglehawk
VIC 3556
Industrial and technical ceramics for heat, corrosion, abrasion.
Products and services from Ceramic Oxide Fabricators Australia
[ General Industrial Suppliers ]
|
|
smooth - 0.2 micron Ra
hard wearing - similar hardness to tungsten carbide
precison made - cylindricity of 20 microns over 500 mm
Diameter range from 6 mm diameter to 85 mm.
Length range from ...
|
|
|
Selection of microcrucibles at the point of a biro.
D84-W, with lid, suitable for Netzsch Jupiter STA/DSC.The lid is 0.5 mm thick, with a central hole 0.3 mm diameter. It weighs under 80 mg.This illu...
|
|
|
is Machinable with ordinary metal working tools
allows Fast Turnaround, no firing required
holds Tight Tolerances, to 0.01 mm / 0.0005 in.
withstands High Temperature, up to 1000 °C
is V...
|
|
|
The SIRO2 sensor is a simple, robust, all ceramic oxygen sensor. It is used for measurement and control of oxygen at high temperature. The sensor can be inserted wherever measurement is required - no ...
|
|
|
Multibore insulators and small tubes available up to 1400 mm long. All other cross-sections available up to 1200 mm long.
Other sizes are possible, including non-circular sections.
Tubes 12 mm O.D. ...
|
|
|
Hot face insulation up to 1800°C
High alumina content for vacuum or reducing atmospheres
High dimensional stability ...
|
|
|
Hot face insulation to 1400°C
Economical back-up for higher temperature insulation
Low thermal mass
Thermal shock resistant
Available as blanket, mat or bulk fiber ...
|
|
|
Good mechanical strength up to 1240°C
Not wetted by non-ferrous metals
Easily machined to complex shapes ...
|
|
|
Can be used up to 2200°C
Low thermal conductivity at ultra high temperatures
Resistant to chemical attack
Thermal shock resistant ...
|
|
|
Zirconia Toughened Alumina (ZTA) is high purity alumina mixed with zirconia, making a tougher, stronger material.
Zirconia Toughened Alumina:
Combines the advantages of partially stabilised zircon...
|
|
|
smooth
hard wearing
precison made
Sizes available range from 1.1 mm to 16 mm inside diameter. The mounting and retention methods we can accomodate include flange end, tapered outside diameter ...
|
News from Ceramic Oxide Fabricators Australia
| Industrial and Scientific Ceramics from Ceramic Oxide Fabricators |
24-07-2008 11:45:39 |
View Article |
Location
Email Us
If you would like further information or pricing please use the form below to email us and we will endeavour to get back to you as soon as possible. Alternatively, click here for our phone contact details.
|
