none
none

High current controller for battery powered applications

M Rutty & Co has extended its portfolio with the addition of a high current controller and a perfectly matched brushless DC motor for the use in battery powered applications.

The single quadrant speed controller can be used for 12V or 24V applications or with low
voltage supply.

It is perfectly matched to the brushless 3-phase BG motors by Dunkermotoren with an
output power of up to 500W.

The controller’s continuous output current is rated for 60A with peak currents of up to 100A (2 sec) at a supply voltage of 8-30V.

The parameter sets for Power Stage Off, CW or CCW operation, two fixed speeds and variable speed operation can be selected either by dip switches or alternatively by digital inputs.

Also, the motor speed can be set either by a 0-10 V, a 0-20 mA or a PWM input. The
parameter sets can be configured via a USB interface.

A speed potentiometer scales the analogue input between 0-100 per cent or sets a fixed speed or current, respectively.

Digital outputs provide motor and system information for external monitoring.

The controller housing can be used in harsh environmental conditions due to its durable
and rugged housing.

Suitable for this controller, Dunkermotoren developed a BG 75 motor series that is perfectly adapted to battery powered applications or low voltages up to 18 VDC, if higher output power is required. Dunkermotoren identified fields of applications mainly where hydraulic drives are still used today.

This includes agricultural machines, construction machines, railway applications, boats and ground transportation vehicles.

M Rutty & Co
Ph: 02 9457 2222
www.mrutty.com.au