Baldor Super-E™ - High Efficiency 3ph ac Motors - IEC Foot & Flange Mount

Quality design and manufacture means that most Baldor Super-E™ motors comply with the requirements for AS1359 MEPS High Efficiency rating, providing lower operating costs and environmental benefits. Higher efficiency means consuming less energy, resulting in a reduction in pollution and greenhouse gas emissions. Advanced design features exceeding IEC34-1 and NEMA MG-1 Standards. Insulation to Class ‘F’ or better with Class ‘B’ operating temperature rise at 40°C ambient. A service factor of 1.15 mean conservative ratings for a long, cost efficient operating life.

Standard IEC metric flange and foot mountings.
Improved efficiency results in less heat and lower operating temperatures.
IP55 Enclosure.
Premium quality Copper Windings 10 TIMES MORE RESISTANT TO MOISTURE than commonly used 185°C wire.
Wound using ISR™ wire which is up to 100 times more resistant to transient spikes, high frequencies, and short rise time pulses produced by inverters.
Stator slot design with an increased number of slots improves both efficiency and power factor.
Advanced computer analysed core designs a longer overall core length ensure high inductive performance, lower flux density, and increased cooling capacity, reducing both magnetic and load losses.
Increased volume of copper, minimises operating temperature rise, reduces resistance, and reduces stator and load losses.
Bearings meet ABEC-1 tolerances, regreasable through easily accessible fittings.
Packed with ‘Mobil Polyrex EM’, moisture resistant, high temperature grease.
Bearings designed to give ABEC-B10 life or 30,000 hours under rated conditions.
High strength and rigidity from cast iron body and end plates.
Terminal box with generous internal capacity and rotatable in 90° increments.
Anti-condensation one-way drain plugs at the lowest point of motor housing.

Email Us

Industry Update - Electrical Components & Manufacturing Equipment
Address		Suite 203, Level 2, 621 Pacific Highway, St Leonards, NSW 2065, Australia
Phone		02 9439 1288
Fax		02 9439 3233
ABN		25 083 502 783