none
none

PROXIMITY SENSORS BOOST SENSING RANGE

06-07-2017
by 
in 

Turck has a new range of 8mm barrel inductive proximity sensors that feature a new-generation ferrite core that increases the sensing range by up to 50 percent.

As a result, flush-mounted devices are available with an extended sensing range of 3mm as well as with the conventional sensing range of 2mm. Similarly, the non-flush-mounting sensors are available with a choice of 3 or 5mm sensing range. And, thanks to newly developed sensor electronics, Turck is also offering devices with an ultra-short 15mm design.

The modular development approach of the sensor series has led to a wide range of variants that will help users to find the ideal 8mm barrel sensor for their application, without compromise. The sensors are available in 15, 22, 30 and 40mm lengths.

On the connectivity side, Turck is offering M8 or M12 connectors as well as sensors with a cable outlet, which in turn can be ordered with a 3- or 4-wire connection as normally closed or changeover contacts.

The sensors with cable outlets are provided with a cable suitable for energy-chain use, and feature a semi-transparent LED ring at the sensor end that shows the sensing state from any viewing angle. The sensors are IP67 rated, and have an operating temperature range of -25 to +70°C.

Turck Australia
1300 132 566
www.turck.com.au

Related news & editorials

  1. Kärcher BD 50/70 R Bp Classic micro ride-on scrubber drier
    18.10.2017
    18.10.2017
    by      In
    New from Kärcher, the BD 50/70 R Bp Classic micro ride-on scrubber drier is highly manoeuvrable with a small 1.6m turning circle. This gives the operator a great overview of the area to be cleaned.
    The unit is very easy and simple to operate - just switch it on and clean away. No in-depth training... Read More
  2. MPS-Series hydraulic pullers
    18.10.2017
    18.10.2017
    by      In
    With the summer shutdown maintenance season approaching, one task that will be on many engineering managers’ minds is the stripping and refurbishment of shaft-mounted machinery, including tracked and wheeled vehicles, rail and materials handling plant and electric motors and gearboxes.
    Enerpac... Read More
  3. 17.10.2017
    17.10.2017
    by      In
    Tennant offers its new Factory Direct Service plans to help customers get maximum availability from their equipment.
    Three different levels of service allow users to choose the most appropriate level of cover, starting with “Essential” cover, which is ideal for the first-timer.
    For those who may... Read More
  4. 17.10.2017
    17.10.2017
    by      In
    By using a German-built EDUR Dissolved Air Filtration pump—or DAF pump—businesses with wastewater treatment systems can save costs across energy and maintenance.
    The EDUR range of Multiphase pumps, distributed by Hydro Innovations, draw in air through a snorkel in the suction line, sheer the air,... Read More