none
none

Oliver gets tough on safety

31-08-2010
by 
in 
Oliver gets tough on safety

Oliver Footwear has “re-invented” the elastic sided boot with the launch of the AT 55-222.

These new boots incorporate all the traditional Oliver features of comfort, durability and safety protection.

The AT 55-222 is a welcome addition to Oliver’s all terrain series.

OIiver provides the most comprehensive range of safety and industrial footwear choices across virtually all wearer and working environments in Australia.

The AT 55-222 is an elastic sided boot that has a wheat coloured, water resistant, Nubuck leather upper with the added feature of a TECtuff rubberised toe bumper to safeguard against premature wear caused by scuffing. 

The comfort features of the boot begin from the sole. Two layers of a dual density nitrile rubber – a softer midsole and a high density hardwearing outsole – cushion the foot and help to reduce foot, leg and lower back fatigue.

Oliver Footwear’s unique COMFORTcushion uses a combination of cellular urethane and PORON to protect the heel and ball of the foot.

And the NANOlite foot bed provides exceptional underfoot comfort, cushioning and support.

The gently raised surface of the NANOlite foot bed also massages the foot when walking to promote greater blood flow and further reduce fatigue.

The dual density sole is heat resistant to 300°C of surface contact, resistant to mineral and organic oils and acids and also affords excellent slip resistance.

Like the other footwear styles in the Oliver AT 55 Range, the new AT 55-222 has a NATUREform Type 1 Steel Toe Cap with a wide profile shape to suit your foot and prevent contact between toes and the toe cap.

Heavy duty Kevlar stitching across all critical seams provides increased strength and adds to the durability of the AT 55-222.  

The new boot also complies with the Australian and New Zealand Standards AS/NZS 2210.3:2009 and the International equivalents EN ISO 20345:2011 and ASTM F2413-11.

Size choices are from 4-14 with half size increments from 6½ to 10½.

The new Oliver AT 55 -222 is available Australia-wide through all major safety supply retailers. 

Related news & editorials

  1. Pmod shield
    16.01.2018
    16.01.2018
    by      In
    A new range of development tools from RS Components aim to help developers build the bridge between their systems and the real world. The range of peripheral modules (or Pmods) and shields from Digilent make it easier to add capabilities such as wireless communications and a wide range of sensors... Read More
  2. PanelView 5310
    15.01.2018
    15.01.2018
    by      In
    Available now from Rockwell Automation, the Allen-Bradley PanelView 5310 family of graphic terminals are ideal for smaller applications using up to 50 HMI screens. The terminals are available now in 7, 9 and 12in display sizes, and a 6in display option will be available shortly.
    Sharing many of the... Read More
  3. Gen4 Super Ion air knife
    15.01.2018
    15.01.2018
    by      In
    The new Exair Gen4 Super Ion air knife eliminates static electricity at low inlet pressures, reducing compressed air use, increasing production throughput and saving money. It can be used to remove static charges from plastics, webs, sheet stock and other product surfaces where tearing, jamming or... Read More
  4. M23 connector
    12.01.2018
    12.01.2018
    by      In
    Treotham Automation has a new right-angled M23 connector from Hummel that is extremely robust, easy to mount and Speedtec-compatible, making it ideal for industrial environments.
    All locking and fastening screws are easily accessible. Clearly visible marking facilitates plugging the connector in,... Read More