none
none

INDUSTRIAL GIGABIT ETHERNET CONVERTOR SWITCHES TO FIBRE

10-08-2017
by 
in 
ORing IGMC-111GP industrial-grade Gigabit Ethernet convertor

New from Control Logic, the ORing IGMC-111GP is an industrial-grade Gigabit Ethernet convertor. The robust unit features a wide operating voltage, supports all copper side speeds and enables user flexibility for a fibre interface via an SFP socket.

The IGMC-111GP addresses local and interfaced device status through user settable DIP-switches that allow for link fault pass-through (LFP). LFP allows an interface on either side to shut down the opposing side in the event of a connected device stopping transmission. Unlike most convertors, this valuable feature enables instantaneous user alerts through link loss and/or via custom user settings with the connected equipment.

With a wide operating temperature range from -40 to +75°C, the IGMC-111GP is suitable for the harshest of environments. There is support for one 10/100/1000Base-T(X) auto-negotiation port and an auto-MDI/MDI-X copper port as well as well a 100/1000Base-X SFP fibre port. Jumbo frames (up to 9Kbyte) with LFP function are supported, including fault relay output, rigid IP30 housing design with DIN-rail and wall mounting options.

Control Logic
1800 557 705
www.control-logic.com.au

 

Related news & editorials

  1. The ABB ACS380 variable speed drive
    19.10.2017
    19.10.2017
    by      In
    The ABB ACS380 variable speed drive is a compact unit designed to answer the demands of large-scale machine builders. Available now from Control Logic, the series has been designed with a range of selectable options to keep costs low.
    Operating over a wide temperature range from -10 to +50ºC... Read More
  2. 19.10.2017
    19.10.2017
    by      In
    The 3340 G-logger, a USB-powered portable accelerometer available from Bestech Australia provides fast fourier transform analysis, optimised for low-noise performance.
    The three-channel accelerometer is designed to optimise the low-noise performance characteristics of single and three-axis variable... Read More
  3. CNC plasma cutting table
    19.10.2017
    19.10.2017
    by      In
    The Swifty is a compact 610 x 610mm CNC plasma cutting table that’s made in the UK and available throughout Australia from Hare and Forbes.
    Able to cut material up to 8mm thick, the Swifty is great value for smaller workshops, and it’s portable – it just needs a 240V supply, an air compressor and a... Read More
  4. Molex Nano-FIT cable
    19.10.2017
    19.10.2017
    by      In
    RS Components is stocking a range of ready-made cable assemblies covering many of the key connector ranges from industry leader Molex.
    The new range of Molex preterminated cables makes it easier for machine builders to adopt industry-standard interconnection components in new and existing designs.... Read More