none
none

EXAIR’s Super Air Nozzle resists corrosion

14-12-2011
by 
in 

EXAIR's new 1 NPT Stainless Steel Super Air Nozzle delivers 6.6 pounds (3005g) of strong blowing force for blowoff, cooling and drying applications located in corrosive, high temperature, food and pharmaceutical environments.

Because the force is more than eight times that of ordinary air nozzles, it is ideal for blowing heavy materials and in situations where the air nozzle can’t be mounted close to the target surface.

The aerodynamic design of the 1 NPT Stainless Steel Super Air Nozzle directs compressed air to a single point of convergence, delivering a concentrated stream of high velocity airflow with hard-hitting force.

Safe operation is assured since the airflow cannot be blocked as required by OSHA standard 29 CFR 1910.242(b). At 80 PSIG, the air consumption is 135 SCFM and the sound level is 99 dBA, meeting the OSHA standard for two hours of use per day without hearing protection.

The Type 316 stainless steel construction of this Super Air Nozzle has a 1-1/2" (38mm) hex body for easy installation using a standard wrench or socket.

Applications include ejection of heavy parts, drying, part and machinery cleaning, chip removal, liquid blowoff and cooling hot parts.

Compressed Air Australia Pty Ltd
Ph:  1300 787 688

www.caasafety.com.au

Related news & editorials

  1. Martin Chappell
    03.11.2017
    03.11.2017
    by      In
    With Australia’s manufacturing industry strengthening, leaders and heads of IT are weighing up which new technologies they should implement to gain a competitive edge. Martin Chappell from Motorola Solutions explains how a simpler and more focused use of data can be the best approach.
    Australia’s... Read More
  2. Sahara Force India F1
    29.08.2017
    29.08.2017
    by      In
    The pace of Formula One (F1) development is rivalled only by the speeds achieved on the racetrack. Each time the Sahara Force India F1 Team brings its car to a circuit, it represents the team’s top engineering; every time the team leaves, the car is just a baseline. Between races it must be... Read More
  3. capacitor reforming
    12.07.2017
    12.07.2017
    by      In
    The latest productivity enhancing service from Konecranes addresses the problem of keeping spare motor drives in shape so they can be relied on to enter service if required. The company’s new variable frequency drive capacitor reforming service uses a proprietary DC power source to reform stored... Read More
  4. 27.06.2017
    27.06.2017
    by      In
    The most heralded benefit of the fourth industrial revolution (or Industry 4.0) is the availability of increasing volumes of data concerning the performance of manufacturing operations (so-called “big data”). These data range from the enterprise level, to the plant level, and down to the individual... Read More