none
none

Boge launches ultra high purity adsorption dryer

05-07-2011
by 
in 

Boge Compressors has recently launched the D series ultra high purity, energy efficient and highly reliable adsorption dryers.

The new Boge D series are highly reliable and cost effective adsorption dryers that embody state-of-the-art technology, ensuring that only high quality compressed air is generated.

The D series features the traditional twin tower system, however each tower contains a cartridge that contains pre and after filtration as well as the desiccant media.

While one tower adsorbs humidity, the other one regenerates the desiccant.

Saturated compressed air leaving the compressor enters the inlet of one of the towers via a water separator which collects water in a special condensate chamber before passing through the pre-filter in the cartridge.

This system prevents any bulk water migration into the desiccant media. This water is then separated during regeneration of the reservoir. Subsequently, the air passes through the desiccant which adsorbs the remaining water vapour from the air.

After the drying process the air passes through a particulate filter which is designed to collect any residual dirt or dust particles so that the air produced conforms to quality Class 2 according to DIN ISO 8573.1.

A unique volume flow regulator controls the flow of compressed air and prevents any over loading of the dryer. Simultaneously to the drying process a small portion of the dried compressed air is directed through the other chamber to adsorb the media. The desiccant is therefore regenerated without any additional energy consumption.

The new D series adsorption dryer from Boge emits very low sound pressure levels making it extremely quiet in operation. This unique sound absorbing feature reduces the exhaust air noise to a maximum 60 dB(A).

The D series is simple to install and easy to maintain. Flow capacity 2.07 m3/min and maximum operating pressure 16 bar.

Boge Compressors Australia Pty Ltd
Ph: 08 9528 2157
www.boge.net.au

Related news & editorials

  1. Martin Chappell
    03.11.2017
    03.11.2017
    by      In
    With Australia’s manufacturing industry strengthening, leaders and heads of IT are weighing up which new technologies they should implement to gain a competitive edge. Martin Chappell from Motorola Solutions explains how a simpler and more focused use of data can be the best approach.
    Australia’s... Read More
  2. Sahara Force India F1
    29.08.2017
    29.08.2017
    by      In
    The pace of Formula One (F1) development is rivalled only by the speeds achieved on the racetrack. Each time the Sahara Force India F1 Team brings its car to a circuit, it represents the team’s top engineering; every time the team leaves, the car is just a baseline. Between races it must be... Read More
  3. capacitor reforming
    12.07.2017
    12.07.2017
    by      In
    The latest productivity enhancing service from Konecranes addresses the problem of keeping spare motor drives in shape so they can be relied on to enter service if required. The company’s new variable frequency drive capacitor reforming service uses a proprietary DC power source to reform stored... Read More
  4. 27.06.2017
    27.06.2017
    by      In
    The most heralded benefit of the fourth industrial revolution (or Industry 4.0) is the availability of increasing volumes of data concerning the performance of manufacturing operations (so-called “big data”). These data range from the enterprise level, to the plant level, and down to the individual... Read More